Three Piece Set
Includes one full backrest cover and two bottom cushion covers. Covers the front bench in the right sections.
Your cart
Your cart is empty
Skeleton text
Skeleton text
Skeleton text
Skeleton text
Skeleton text
Skeleton text
Skeleton text
Front Seat Covers & Spring Parking Brake Assist & Seat Belt Harness for Polaris Ranger
SKU: CA0553
Description
Q: Can I still use the 60/40 split seat after installing the covers?
A: Yes. The split bottom design keeps each seat section fully functional, allowing you to lift, fold, or access either side of the bench seat without removing the covers.
Rugged Camo Style: The camo pattern adds a rugged outdoor look to your Ranger interior while covering faded or worn factory seats. The 3-piece set gives your front bench a fresh look without changing the original seat layout.
Scratch and Wear Defense: 1680D Oxford cloth gives the seat a tougher outer layer for regular Ranger use. The fabric handles seat sliding and pet claws better than bare factory upholstery.
Spring Brake Lock: A spring-driven locking mechanism secures the brake pedal after pressing, maintaining a steady braking force without continuous foot pressure. Manrock spring parking brake provides smooth engagement and release for controlled temporary parking on uneven surfaces or transport stops.
Transmission Load Protection: The brake assist stabilizes parked vehicles on slopes or during trailer transport. It reduces rollback and lowers stress on the transmission and parking gear when the vehicle is not fully secured by the gear alone.
Seat Belt Sensor Bypass: Connects to the factory seat belt sensor plug and keeps the electronic belt signal recognized. It can help prevent speed-limited mode on compatible Polaris and Can-Am UTVs when the factory buckle sensor is not being used.
Plug-and-Play Fit: Connects directly to the factory seat belt sensor plug for quick installation. The secure connection stays firmly in place without any wire modification.
What’s in the box?
Full backrest seat cover x 1
60 percent bottom cushion cover x 1
40 percent bottom cushion cover x 1
Spring parking brake × 1
Seat Belt Bypass Plug × 1
Note: For bypassing the factory seat belt sensor only. Not a replacement for the seat belt. Always wear your seat belt while driving.
Free Shipping & Return
Good After-sales Service:
Brand New, One-year warranty, if you have any questions, please contact us at Email: service@manrockmoto.com, Call / SMS: +1 (949) 358 4793. We will reply to you within 24 hours.
30-Day Return Policy
We have a 30-day return policy, which means you have 30 days after receiving your order to request a return. Just make sure the item is unused/unworn, sealed, with tags attached, and keep your receipt/ proof of purchase. If your return is accepted, we'll provide you with a return address. DO NOT install the items if unsatisfied. EX. Not accepting the hubcaps with foam tapes attached as the resale value was affected. Return the item with its original packaging. Any product returned without our prior approval will be refused. For full details on policies, please visit our Return & Refund page.
Please note the following: The item must be in brand new, unused, and uninstalled condition to be eligible for a refund. Customers are responsible for covering the return shipping costs in cases not related to product defects.
Damaged Package Assistance
If your package arrives damaged, you may accept the delivery first. After receiving the package, please contact our customer service team, and we will assist you with the return or replacement process.
Saudi Arabia Address Policy
In accordance with the requirements of the Saudi Arabian government, all parcels shipped to Saudi Arabia on or after January 1, 2026 must include a valid National Address (Short Address) for customs clearance and final delivery.
The Saudi National Short Address consists of 4 letters followed by 4 numbers (e.g., RAGI2929).
Customers may obtain their Saudi National Short Address through the following official channels:
- Saudi Post (SPL) Official Website: https://splonline.com.sa/ar/
- SPL Automated Hotline: +966 11 289 88888
- WhatsApp: Contact Saudi Post (SPL) via WhatsApp to share location details and retrieve the Short Address
Payment methods
Front Seat Covers & Spring Parking Brake Assist & Seat Belt Harness for Polaris Ranger
Front Seat Covers
Split Seat Access
The 60/40 bottom design keeps both seat sections working separately. Either side can lift or fold without removing the covers.
Water-Resistant Fabric
Oxford fabric helps keep light moisture off the factory seat surface. Cleanup is easier after wet rides.
1680D Oxford Fabric
1680D Oxford cloth adds a tougher layer over factory upholstery, helping protect seats from daily use and frequent entry and exit.
Secure Fit
Elastic edges and fixed straps hold the covers close to the bench. No seat removal is needed for installation.
Fresh Camo Look
Camo fabric gives the Ranger cab a cleaner outdoor look. Worn seat surfaces get covered without changing the original layout.
Product Highlights
No Need to Hold the Brake
Once engaged, the lock keeps the brake pedal pressed without constant foot pressure, making parking more convenient.
Simple Brake Release
Ready to drive again? Simply press the brake pedal to release the lock and get back on the move.
Added Security
Add a compatible padlock to the brake pedal lock when parked for an extra layer of security and added peace of mind.
Durable Steel Construction
Built from sturdy steel, the lock is designed for regular use and repeated locking and release cycles in off-road environments.
Seat Belt Harness
Broad UTV Compatibility
Compatible with select Polaris RZR and Ranger models as well as Can-Am Commander, Maverick, and Defender models with the matching factory connector.
Durable PVC Housing
Durable PVC construction provides a tough outer layer that protects the internal components for reliable use under the seat.
Avoid Speed Limiting
Maintains the required seat belt sensor signal on compatible UTVs to help avoid speed limited mode when the factory buckle is not engaged.
Direct Plug In
Connects directly to the factory seat belt sensor connector without cutting or modifying the original wiring for a simple installation.
Built to Conquer the Trail
Manrock creates UTV and ATV accessories for riders who demand more from their machines. Rooted in off-road culture, we focus on control, reliability, and seamless integration. Built for real trail conditions, every product delivers dependable performance and greater confidence wherever the ride takes you.
/pages/about-us
About MANROCK
MANROCK is a professional brand specializing in UTV, ATV, and off-road motorcycle gear and modifications. We focus on real-world off-road riding scenarios, providing high-performance, durable, and upgradable vehicle parts to help riders achieve stronger control and reliability in complex terrains.
Our Offline Store
3480 W Warner Ave (Ste. O), Santa Ana, CA 92704, United States
Located in: South Coast Business Center
Install Quotes and Appointments: +1 (949) 358-4793
Get Direction- Choosing a selection results in a full page refresh.
- Opens in a new window.